[bootlin/training-materials updates] master: yocto: lab1: BBB: fix section title (36dfe480)

[Luca Ceresoli]

Repository : https://github.com/bootlin/training-materials
On branch  : master
Link       : https://github.com/bootlin/training-materials/commit/36dfe480b3349b404e5b1ddf050b4e250a401485

>---------------------------------------------------------------

commit 36dfe480b3349b404e5b1ddf050b4e250a401485
Author: Luca Ceresoli <luca.ceresoli at bootlin.com>
Date:   Fri Jul 22 15:55:35 2022 +0200

    yocto: lab1: BBB: fix section title
    
    We do not configure the U-Boot environment, thus remove it from the section
    title.
    
    Signed-off-by: Luca Ceresoli <luca.ceresoli at bootlin.com>


>---------------------------------------------------------------

36dfe480b3349b404e5b1ddf050b4e250a401485
 labs/yocto-first-build/yocto-first-build.tex | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/labs/yocto-first-build/yocto-first-build.tex b/labs/yocto-first-build/yocto-first-build.tex
index 8f6ad393..21f3881c 100644
--- a/labs/yocto-first-build/yocto-first-build.tex
+++ b/labs/yocto-first-build/yocto-first-build.tex
@@ -145,7 +145,7 @@ you wish to exit \code{picocom}, press \code{[Ctrl][a]} followed by
 There should be nothing on the serial line so far, as the board is not
 powered up yet.
 
-\section{Configure the U-Boot environment and boot}
+\section{Boot}
 
 Insert the SD card in the dedicated slot on the BeagleBone Black. Press the S2
 push button (located just above the previous slot), plug in the USB cable and