[bootlin/training-materials updates] master: Boot-time: add shopping list (f38e4cb1)

[Michael Opdenacker]

Repository : https://github.com/bootlin/training-materials
On branch  : master
Link       : https://github.com/bootlin/training-materials/commit/f38e4cb11b0818e402650d866d9aefe11cb53b89

>---------------------------------------------------------------

commit f38e4cb11b0818e402650d866d9aefe11cb53b89
Author: Michael Opdenacker <michael.opdenacker at bootlin.com>
Date:   Tue Oct 26 13:16:53 2021 +0200

    Boot-time: add shopping list
    
    Signed-off-by: Michael Opdenacker <michael.opdenacker at bootlin.com>


>---------------------------------------------------------------

f38e4cb11b0818e402650d866d9aefe11cb53b89
 mk/boot-time.mk                                    |  1 +
 .../boot-time-shopping-list.tex                    | 38 ++++++++++++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/mk/boot-time.mk b/mk/boot-time.mk
index 62720fc1..2b6aa9e8 100644
--- a/mk/boot-time.mk
+++ b/mk/boot-time.mk
@@ -6,6 +6,7 @@ BOOT_TIME_SLIDES = \
 		course-information-title \
 		beagleboneblack-board \
 		beaglecam \
+		boot-time-shopping-list \
 		board-setup-lab \
 		boot-time-principles \
 		build-system-bootloader-kernel-lab \
diff --git a/slides/boot-time-shopping-list/boot-time-shopping-list.tex b/slides/boot-time-shopping-list/boot-time-shopping-list.tex
new file mode 100644
index 00000000..cbbabffe
--- /dev/null
+++ b/slides/boot-time-shopping-list/boot-time-shopping-list.tex
@@ -0,0 +1,38 @@
+\begin{frame}
+\frametitle{Shopping list: basic hardware for this course}
+  \begin{columns}
+    \column{0.85\textwidth}
+    \begin{itemize}
+      \item BeagleBone Black or BeagleBone Black Wireless - Multiple distributors: \\
+	    See \url{https://beagleboard.org/Products/}.
+      \item 5V power supply, at least 2A, for the BeagleBone Black, with a 5.5V barrel
+            jack connector. Needed to drive the LCD cape!\\
+	    \url{https://www.olimex.com/Products/Power/SY1005E/}
+      \item USB Serial Cable - 3.3 V - Female ends (for serial console): \\
+	    \url{https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-SERIAL-F/}
+      \item Beagle Bone LCD4.3 cape from Element 14\\
+            \url{https://www.element14.com/bbcape43}
+      \item A standard micro SD card - 1 GB or more
+      \item A faster micro SD card - 1 GB or more
+    \end{itemize}
+    \column{0.15\textwidth}
+    \includegraphics[height=0.20\textheight]{common/usb-serial-cable-female.png} \\
+    \includegraphics[height=0.20\textheight]{common/sd-card.pdf} \\
+  \end{columns}
+\end{frame}
+
+\begin{frame}
+\frametitle{Shopping list: optional hardware for this course}
+  If you are interested in doing the hardware measurement lab
+    \begin{itemize}
+      \item A handful of breadboard wires (at least 10 to have sufficient different colors)\\
+	    Olimex: \url{https://bit.ly/2pSiIPs}
+      \item Arduino Nano board (or a clone), with its USB power cable\\
+            \url{https://store.arduino.cc/arduino-nano}
+      \item A breadboard large enough to plugin the Arduino Nano\\
+            \url{https://www.olimex.com/Products/Breadboarding/BREADBOARD-1/}
+      \item A four digit display based on the TM1637 chip\\
+            \url{https://www.seeedstudio.com/Grove-4-Digit-Display.html}
+      \item A 1,000 to 10,000 Ohm resistor for use as a pull-down resistor
+    \end{itemize}
+\end{frame}