[bootlin/training-materials updates] master: Bootloaders: use "DRAM" instead of "RAM" for consistency (27f8b0de)

[Michael Opdenacker]

Repository : https://github.com/bootlin/training-materials
On branch  : master
Link       : https://github.com/bootlin/training-materials/commit/27f8b0de331bcc18a5c9547a3e9f0c9d9b53a73f

>---------------------------------------------------------------

commit 27f8b0de331bcc18a5c9547a3e9f0c9d9b53a73f
Author: Michael Opdenacker <michael.opdenacker at bootlin.com>
Date:   Thu Sep 23 15:14:56 2021 +0200

    Bootloaders: use "DRAM" instead of "RAM" for consistency
    
    - And to avoid the ambiguity with SRAM
    
    Signed-off-by: Michael Opdenacker <michael.opdenacker at bootlin.com>


>---------------------------------------------------------------

27f8b0de331bcc18a5c9547a3e9f0c9d9b53a73f
 .../sysdev-bootloaders-sequence.tex                      | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/slides/sysdev-bootloaders-sequence/sysdev-bootloaders-sequence.tex b/slides/sysdev-bootloaders-sequence/sysdev-bootloaders-sequence.tex
index f95e096a..69cadc79 100644
--- a/slides/sysdev-bootloaders-sequence/sysdev-bootloaders-sequence.tex
+++ b/slides/sysdev-bootloaders-sequence/sysdev-bootloaders-sequence.tex
@@ -117,12 +117,12 @@
       possible in standard boot mode.
     \item {\bf U-Boot SPL}: runs from SRAM. Initializes the DRAM,
       the NAND or SPI controller, and loads the secondary bootloader
-      into RAM and starts it. No user interaction possible.
-    \item {\bf U-Boot}: runs from RAM. Initializes some other hardware
+      into DRAM and starts it. No user interaction possible.
+    \item {\bf U-Boot}: runs from DRAM. Initializes some other hardware
       devices (network, USB, etc.).  Loads the kernel image from
-      storage or network to RAM and starts it. Shell with commands
+      storage or network to DRAM and starts it. Shell with commands
       provided.
-    \item {\bf Linux Kernel}: runs from RAM. Takes over the system
+    \item {\bf Linux Kernel}: runs from DRAM. Takes over the system
       completely (the bootloader no longer exists).
     \end{itemize}
     Note: same process on other Microchip AT91 SoCs, but the
@@ -139,14 +139,14 @@
     \footnotesize
     \begin{itemize}
     \item {\bf ROM Code}: tries to find a valid bootstrap image from
-      various storage sources, and load it into RAM. The RAM
+      various storage sources, and load it into DRAM. The DRAM
       configuration is described in a CPU-specific header, prepended
       to the bootloader image.
-    \item {\bf U-Boot}: runs from RAM. Initializes some other hardware
+    \item {\bf U-Boot}: runs from DRAM. Initializes some other hardware
       devices (network, USB, etc.).  Loads the kernel image from
-      storage or network to RAM and starts it. Shell with commands
+      storage or network to DRAM and starts it. Shell with commands
       provided. File called \code{u-boot.kwb}.
-    \item {\bf Linux Kernel}: runs from RAM. Takes over the system
+    \item {\bf Linux Kernel}: runs from DRAM. Takes over the system
       completely (bootloaders no longer exists).
     \end{itemize}
   \end{columns}