[FE training-materials-updates] sysdev: update _config to _defconfig in U-Boot
Antoine Ténart
antoine.tenart at free-electrons.com
Mon Dec 14 16:07:41 CET 2015
Repository : git://git.free-electrons.com/training-materials.git
On branch : master
Link : http://git.free-electrons.com/training-materials/commit/?id=047349600fe229a10773b672390a02fee9033237
>---------------------------------------------------------------
commit 047349600fe229a10773b672390a02fee9033237
Author: Antoine Tenart <antoine.tenart at free-electrons.com>
Date: Mon Nov 23 17:31:51 2015 +0100
sysdev: update _config to _defconfig in U-Boot
Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
>---------------------------------------------------------------
047349600fe229a10773b672390a02fee9033237
labs/sysdev-u-boot/sysdev-u-boot.tex | 4 ++--
slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/labs/sysdev-u-boot/sysdev-u-boot.tex b/labs/sysdev-u-boot/sysdev-u-boot.tex
index 23bfe2c..c0b6d87 100644
--- a/labs/sysdev-u-boot/sysdev-u-boot.tex
+++ b/labs/sysdev-u-boot/sysdev-u-boot.tex
@@ -211,8 +211,8 @@ Basically, you need to:
\item Set the \code{CROSS_COMPILE} environment variable;
-\item Run \code{make <NAME>_config}, where \code{<NAME>} is the name
- of your board as declared in \code{boards.cfg}. There are
+\item Run \code{make <NAME>_defconfig}, where \code{<NAME>} is the
+ name of your board as declared in \code{boards.cfg}. There are
two flavors of the Xplained configuration: one to run from the SD card
(\code{sama5d3_xplained_mmc}) and one to run from the NAND flash
(\code{sama5d3_xplained_nandflash}). Since we're going to boot on
diff --git a/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex b/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex
index 1e8fa5e..cdfd3f7 100644
--- a/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex
+++ b/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex
@@ -90,7 +90,7 @@
\begin{itemize}
\item U-Boot must be configured before being compiled
\begin{itemize}
- \item \code{make BOARDNAME_config}
+ \item \code{make BOARDNAME_defconfig}
\item Where \code{BOARDNAME} is the name of the board, as visible
in the \code{boards.cfg} file (first column).
\item New: you can now run \code{make menuconfig} to further
More information about the training-materials-updates
mailing list