[FE training-materials-updates] Bootloader/Yocto labs: use a locally-administered MAC Address
Michael Opdenacker
michael.opdenacker at free-electrons.com
Tue Feb 10 05:34:06 CET 2015
Repository : git://git.free-electrons.com/training-materials.git
On branch : master
Link : http://git.free-electrons.com/training-materials/commit/?id=25493e17a5321c521646236b69fca0523587fa4e
>---------------------------------------------------------------
commit 25493e17a5321c521646236b69fca0523587fa4e
Author: Luca Ceresoli <luca at lucaceresoli.net>
Date: Wed Feb 4 11:50:25 2015 +0100
Bootloader/Yocto labs: use a locally-administered MAC Address
00:01:02:03:04:05 is a globally-administered MAC Address, assigned to
3COM CORPORATION.
This is most likely not a problem in real world cases, but for the sake of
precision and to be extra safe, let's be picky and use an address with the
locally-administered bit set.
Signed-off-by: Luca Ceresoli <luca at lucaceresoli.net>
>---------------------------------------------------------------
25493e17a5321c521646236b69fca0523587fa4e
labs/sysdev-u-boot/sysdev-u-boot.tex | 2 +-
labs/yocto-advanced-configuration/yocto-advanced-configuration.tex | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/labs/sysdev-u-boot/sysdev-u-boot.tex b/labs/sysdev-u-boot/sysdev-u-boot.tex
index 897c97c..1d2a16f 100644
--- a/labs/sysdev-u-boot/sysdev-u-boot.tex
+++ b/labs/sysdev-u-boot/sysdev-u-boot.tex
@@ -326,7 +326,7 @@ The first time you use your board, you also need to set the MAC
address in U-boot:
\begin{verbatim}
-setenv ethaddr 00:01:02:03:04:05
+setenv ethaddr 12:34:56:ab:cd:ef
\end{verbatim}
In case the board was previously configured in a different way, we
diff --git a/labs/yocto-advanced-configuration/yocto-advanced-configuration.tex b/labs/yocto-advanced-configuration/yocto-advanced-configuration.tex
index 7e26efe..36ef5ff 100644
--- a/labs/yocto-advanced-configuration/yocto-advanced-configuration.tex
+++ b/labs/yocto-advanced-configuration/yocto-advanced-configuration.tex
@@ -60,7 +60,7 @@ The first time you use your board, you also need to send the MAC address
in U-boot:
\begin{verbatim}
-setenv ethaddr 00:01:02:03:04:05
+setenv ethaddr 12:34:56:ab:cd:ef
\end{verbatim}
In case the board was previously configured in a different way, we
More information about the training-materials-updates
mailing list